We surveyed the floor with the client checking for:
- Condition of the substrate
- Moisture content
- Floor usage requirement
We recommended a floor finish to meet customer requirements. In this case our recommendation was
for a decorative flake finish.
The Preparation involved:
- Removing loose surface to provide sound surface key
- Vacuum blasting
- Surface grinding
Our next step involved priming the substrate with our
Topcoat Primer to seal the surface and also to provide a good adhesive key for the Topcoat Floor System.
After the primer had cured overnight, Topcoat Epoxy
Self Levelling Screed was applied using a notched trowel. The
decorative flake was then applied. In this case the customer had
chosen the Topcoat Tomato Red floor finish with flakes of white, which
created a striking finish.
The resulting floor is smooth, very hard wearing and easily cleaned. The difference between
the floor conditions before and after is remarkable as seen in the photos.
Feel free to contact us on +353 61 369497
